Specifications - Makita DUR193 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
No load speed
(without cutting tool)
Overall length
Nylon cord diameter
Applicable Nylon cutting head
cutting tool (P/N: 191Y39-5)
and cutting
diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Warning; Disconnect battery before
maintenance.
DUR193
7,800 min
1,228 - 1,436 mm
1.65 mm
260 mm
D.C. 18 V
2.3 - 2.6 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Wear safety glasses.
Wear ear protection.
Wear eye and ear protection.
Do not expose to moisture.
8 ENGLISH
-1
DC18SH
PDC01