Bartscher 1509851 Instruction Manual page 48

Gas cooker
Arrangement of gas burners on the cooking surface
Igniting burners
 To ignite a burner, press in on the appropriate dial and
turn it counter-clockwise, to the high-flame symbol.
 Hold the dial in for 3-4 seconds until the flame ignites.
 After the flame appears, set the desired strength by turning
the dial between the highest and lowest setting; never set
the dial between the high flame and OFF position (

If the flame goes out (e.g. draught, spilled liquid, etc.), the safety valve will cut off the
flow of gas.
Tips and advice

Do not use a flame larger than the pot/pan located on the burner.

When the food begins to cook, reduce the flame to its lowest level to avoid it being
extinguished by spillages.

Excersize special caution when using oils and fats, as overheating may cause them to
ignite. Danger of fire!

Use only cookware with a flat bottom.
- 44 -
①
Quick burner
②
Standard burner
④
Efficient burner
⑤
Triple ring
∙
).