Introduction; Symbols - Claas ELIOS 240-210 Repair Manual

01 ENGINE - F5C

introduction

Introduction
Workshop manuals are subdivided into Parts and Sections, each characterized by a number, with its content specified in
the general summary.
Sections with mechanical content present the technical data, tightening torque sets, lists of tools, removal-refitting of
groups, revisions on bench, diagnostic and maintenance plans.
Sections or parts of the electrical/electronic systems describe the electrical network and electronic systems of the unit,
electrical diagrams, specifications of components, coding of components and diagnostic corresponding to the specific units
of the electrical system.
Section 1 describes the specifications of the engines, as well as their general operation.
Section 2 describes the type of fuel supply.
Section 3 covers operating more specifically, and includes four separate parts:
1. Mechanical part dedicated to engine maintenance, limited to the components differentiated according to specific use.
2. Electrical part related to wiring, electrical and electronic devices differentiated according to specific use.
3. Scheduled maintenance and specific revision.
4. Part of the diagnostic dedicated to those who, when providing technical support, must have simple and direct indications
to troubleshoot the main problems.
Sections 4 and 5 concern overhaul operations of the engine fitted on the swivel cradle and the tools required for its
performance.
The appendix enumerates the general safety standards which everyone, whether the installers or handlers, must apply to
avoid severe accidents.
In its descriptions, the manual uses appropriate symbols to classify the information indicated. More particularly, we have
defined a series of symbols to classify remarks and another for support operations.

Symbols

Danger for persons
Non compliance with these instructions may result in severe danger for persons.
Risk of severe damage to the unit
Partial or total non-observation of these prescriptions results in the risk of severe damage to the unit
and may sometimes cancel the warranty.
Danger
Covers all the risks of both warnings mentioned above.
Environmental protection
Indicates the correct behavior required to ensure the unit is used with maximum compliance with
the environment.
NOTE
Provides an additional explanation for a piece of information.
Support operation
Example:
8
Ø 1 = Housing for the connecting rod
eye socket
Ø 2 = Connecting rod bearing housing
Nexos Elios 210-220-230 – EN
Close at torque
Close at torque+
angular value