Failsafe Alarm Relay Specifications; Supported Networking Standards; Copper Ethernet Port Specifications - Siemens SIMATIC NET RUGGEDCOM RS910W Installation Manual

Technical Specifications
5.2 Failsafe Alarm Relay Specifications
5.2

Failsafe Alarm Relay Specifications

Hazardous Environments
Maximum Switching Voltage
Non-Hazardous Environment
Maximum Switching Voltage
5.3

Supported Networking Standards

The following networking standards are supported by RUGGEDCOM RS910W:
Standard
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.1D
IEEE 802.1Q
IEEE 802.1p
5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RS910W.
Speed
Connector
Duplex
Cable Type
32
30 VDC
80 VDC
30 VAC
30 VDC
125 VDC
125 VAC
220 VDC
250 VAC
10 Mbps
Ports
•
•
•
•
a
10/100Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
Rated
Switching
Current
1 A 1500 V
rms
0.3 A
Rated
Switching
Current
2 A, 60 W 1500 V
rms
0.24 A, 30 W
0.5 A, 62.5 W
0.24 A, 60 W
0.25 A, 62.5 W
100 Mbps 1000 Mbps Ports
Ports
• •
•
•
• •
• •
• •
Isolation
for 1 minute
Isolation
for 1 minute
Notes
Full Duplex Operation
1000Base-LX
1000Base-Tx
MAC Bridges
VLAN (Virtual LAN)
Priority Levels
Installation Manual, 04/2021, C79000-G8976-1031-12
RUGGEDCOM RS910W