Troubleshooting - Electrolux EKG913B3OX User Manual

22 www.electrolux.com
Make sure the levers are in
their original position before
closing the door.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
There is no spark when
you try to activate the
spark generator.
A
B
Possible cause
The hob is not connected
to an electrical supply or it
is connected incorrectly.
12.4 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable
300 °C heat-resistant lamp.
4. Install the glass cover.
Remedy
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.