Electrolux EKG913B3OX User Manual page 28

28 www.electrolux.com
2. Carefully remove from the burner the
thermocouple A. Next remove the
spark plug B.
3. Unscrew the screw and slowly pull
out the burner.
4. Release the burner injector with a 7
mm socket spanner and replace it
with a right one.
A
B
1
2
Assemble the burner in a revers
sequence.
Replace the gas type sticker near the
gas supply ramp with the one related to
the new gas type.
14.13 Adjusting the minimum
gas level on the oven burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the oven
functions. If there is no access to the
bypass screw dismount the control
panel before adjustment start.
3. With a thin and flat screwdriver adjust
the bypass screw A.
The model determines the position of
the bypass screw A.
Changing from natural gas to
liquid gas
1. Fully tighten the bypass screw.
2. Put the knob back.
3. Connect the appliance to the
electricity.
A