VonHaus 3500195 Manual

3500195
Please read all instructions carefully before use and
retain for future reference.
CAUTION Sharp edges.
Protect your hands.
Protect your eyes.
Wear suitable footwear.
A5P | 01
EN
Basic safety precautions should always be followed
when using hand tools.
GENERAL PRECAUTIONS This tool is not intended
for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience or knowledge, unless supervised and given
appropriate instruction regarding the correct use of the
tool by a person responsible for their safety.
Read, and make sure you fully understand, all safety
information before using this wrench.
Failure to follow the warnings and instructions may
result in serious injury.
Please retain this guide for future reference.
This tool is not a toy. Keep away from children and
animals. Children and pets should be supervised to
ensure they are kept away from the work area.
Never use hand tools as power tool accessories. You
should never combine the use of a power tool with a
manual tool unless specified as doing so can cause
serious personal injury. Do not use the tool for anything
other than its intended use.
Always secure your workpiece. Smaller workpieces
should be secured using a vice or clamp during use.
WORK AREA SAFETY Keep your work area clean and
well lit. Cluttered or dark areas invite accidents.
Do not use tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Use
of some tools can create sparks which may ignite the
dust or fumes.
Keep children, pets and bystanders away whilst using
the tool. Distractions can cause you to lose control.
Shut off any live electrical equipment around your work
area before commencing work with any non-insulated
tool. Only use insulated tools and tools with appropriate
IEC/VDE working on live electrical applications.
BEFORE USE Do not use hand tools whilst you are tired
or under the influence of drugs, alcohol or medication.
A moment of inattention whilst using tools may result in
serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety
shoes, hard hat, safety gloves or hearing protection
used for appropriate conditions will reduce the risk of
personal injury. Dress appropriately. Do not wear loose
clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose-fitting clothes, jewellery
or long hair can become caught in moving parts.
It is recommended to fully sharpen tools before first
use (where applicable). Become familiar with the tool.
Practice use of the tool on scrap material until you are
familiar with the correct handling, use and limitations of
the tool. If devices are provided for the connection of
dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
Safety glasses or goggles should be worn at all times
when using any hand tool.
Always follow the manufacturer's directions regarding
torque direction, proper force, torque pattern/sequence,
use or non-use of lubrication on fasteners and torque
"tighten/release" cycles.