VonHaus 0518 Care & Use Instructions

HAND TOOL CARE & USE INSTRUCTIONS
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
Basic safety precautions should always be followed
when using hand tools.
GENERAL PRECAUTIONS
This tool is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
or knowledge, unless supervised and given
appropriate instruction regarding the correct use of
the tool by a person responsible for their safety.
This tool is not a toy. Keep away from children and
animals. Children and pets should be supervised to
ensure they are kept away from the work area.
Never use hand tools as power tool accessories.
You should never combine the use of a power tool
with a manual tool unless specified as doing so can
cause serious personal injury. Do not use the tool
for anything other than its intended use.
Always secure your workpiece. Smaller workpieces
should be secured using a vice or clamp during use.
WORK AREA SAFETY
Keep your work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not use tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Use of some tools can create sparks which may
ignite the dust or fumes.
Keep children, pets and bystanders away whilst
using the tool. Distractions can cause you to lose
control.
Shut off any live electrical equipment around your
work area before commencing work with any non-
insulated tool. Only use insulated tools and tools
with appropriate IEC/VDE working on live electrical
applications.
BEFORE USE
Do not use hand tools whilst you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention whilst using tools may result
in serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, safety gloves or hearing
protection used for appropriate conditions will
reduce the risk of personal injury.
Dress appropriately. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose-fitting clothes, jewellery
or long hair can become caught in moving parts.
02 0518
It is recommended to fully sharpen tools before first
use (where applicable).
Become familiar with the tool. Practice use of the
tool on scrap material until you are familiar with the
correct handling, use and limitations of the tool.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
IMPORTANT SAFETY INFORMATION FOR USE
Use the tool, accessories and tool bits in
accordance with these instructions and in the
manner intended for the particular type of tool,
taking into account the working conditions and
the work to be performed. Use of the tool for
operations different from those intended could
result in a hazardous situation.
Stay alert, watch what you are doing, and use
common sense when using the tool.
Beware of sharp edges. Handle sharp-edged and
pointed tools with care. Ensure sharp-edged and
pointed tools are kept sharp as this will make them
easier to control.
Always cut away from yourself when using cutting
or sharp-edged tools.
Always carry sharp-edged and pointed tools by
your side with the point and heavy ends pointing
downwards.
Do not force the tool. Always use the correct tool
for your application. The correct tool will do the job
better and more safely at the rate for which it was
designed.
Do not overreach. Keep proper footing and balance
at all times. This will enable better control of the
tool in unexpected situations.
Always use the correct type of tool for the type of
material being worked on.
NOTE The above list is non-exhaustive
and is recommended as a basic level of
protection for general tasks. Before starting
any task, refer to your local hardware store
or a professional for advice on which safety
equipment would be best suited to the task
at hand.