Multi-Projection - Barco G62 User Manual

User controls — Installation
- Overlap Grid Number: Set the blend overlap grid number.
- Gamma: Set the gamma value of the blend area to adjust the curvature of the blending effect.
Width
Blend area
Gamma
Image 7–11
Memory
The projector allows the user to save up to five geometry memories, including the ones set directly on the
projector and the ones configures via external software tool. The available options are Save Memory, Apply
Memory, and Clear Memory.
Reset
Reset the geometry settings to factory default values.

7.8 Multi-Projection

About multi-projection
Multi-Projection is a submenu group that consists of the functions for multiple projector applications.
Projector ID
Set the identification code for each projector.
Remote Code
Set the remote code for each remote control to have it matching with the projector.
3D Setup
Configure the 3D settings for each projector when performing 3D warp and blend.
Light Source Settings
Configure the light source settings for the projectors to have their brightness level matching with each other.
Color Mode
Set the projectors to the same color mode.
48 R5914653 /02 G62