Advertisement
Safety instructions for installation
1.
The product must be used by skilled and trained personnel only.
Personnel scheduled to be trained, familiarized, instructed, or
participating in a general training course may only work with the product
under the supervision of an experienced person.
2.
Note the ESD handling instructions and handle components with care.
3.
Turn off the power supply before connecting Phantom Edge to the LT
panel.
4.
Always make sure that the LT panel is de-energized by using a tester.
When an electric tester touches a live or hot wire, the bulb inside the
tester lights up showing that the respective wire is live. Check all the
wires, the outer metallic covering of the LT panel, and any other hanging
wires with an electrical tester before proceeding with your work.
5.
Be sure your hands are dry and wear non-conductive gloves, protective
clothing and shoes with insulated soles.
6.
Never use equipment with frayed cords, damaged insulation, or broken
plugs.
7.
Always use insulated tools while working.
8.
Know the wire color code of your country. Refer to exhibit 1 in the
installation steps.
9.
Do not drop Phantom Edge. It may lead to its damage or malfunctioning.
10.
If the phantom edge unit is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
Service & Support
Robert Bosch Engineering And Business Solutions Private Limited
123, Industrial Layout, Hosur Road, Koramangala, Bangalore 560 095, India
Mail ID: Support.Phantom@in.bosch.com
20
Advertisement
