Mevb Configuration - Motorola M68MPB916X1 User Manual

Mcu personality board
Table of Contents

Advertisement

2.4 MEVB CONFIGURATION

The MEVB contains:
• MPB – MCU-device-specific board that defines the MCU to be evaluated.
• M68MPFB1632 Modular Platform Board (MPFB) – which provides the
interface connections to the host computer, logic analyzer connections, and
the platform for installing the MPB. For more information about the MPFB
and MEVB system connections refer to the M68MPFB1632 Modular
Platform Board User's Manual, M68MPFB1632/D. Chapter 3 contains
information to help you get started using your MEVB.
To install the MPB on the MPFB (refer to Figure 2-3):
1. Inspect all connectors for bent or damaged pins.
2. Align the MPB reference mark with the MPFB reference mark.
3. Rotate the MPB until the four MAPI bus connectors on its bottom mate
4. Firmly press the MPB onto the MPFB.
5. Follow the instructions in the appropriate manual when connecting your
M68MPB916X1UM/D
Turn OFF MPFB power when installing the MPB on the MPFB or
removing the MPB from the MPFB. Sudden power surges could
damage MEVB integrated circuits.
with the MAPI bus connectors on the top of the MPFB. (There is only one
way to connect the MPB and the MPFB.)
debugger hardware to the background debug mode connector.
Support the bottom side of MPFB when installing the MPB on the
MPFB. Excessive flexing of the MPFB could damage the printed
circuit.
HARDWARE PREPARATION AND INSTALLATION
CAUTION
CAUTION
2-9

Advertisement

Table of Contents
loading

Table of Contents