Inspection references
Back cover inspection
About this task
In order to assess the deformation of the back cover of Kiva II, inspect the back cover on every single enclosure.
Take down the enclosure before inspection.
Procedure
— Check the rigging pin holes for signs of ovalization.
The hole should t the pin with no visible gap.
— Touch the rim around the rigging pin and make sure no bump is perceptible.
What to do next
If any deformation is detected, immediately withdraw the product from use for corrective maintenance:
enclosure
Kiva II
Kiva II owner's manual (EN) version 3.0
repair kit(s)
• 1 × G03298 (KR rear rigging KIVA II)
• 1 × G03303 (KR screws and fasteners KIVA II)
Inspection and preventive maintenance
procedure
Kiva II back cover
(p.87)
37