Pre-Position Mapping - Bosch MIC inteox 7100i User Manual

MIC inteox 7100i
Defined
Move and adjust the size of the green box to cover an interesting area.
The camera computes the lighting condition to the center spot of the specified area. Then the
camera determines the optimum level of iris, gain, and shutter speed to get an image.
Note: the size shape of the specified area does not matter.
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Day near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.
Night near limit [m]
Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the night.
White light illuminators
Select On to turn on the White light illuminators.
Select Off to turn off the White light illuminators.
White light intensity
Select the degree of intensity of the White light.
7.10

Pre-position mapping

Pre-position mapping allows you to map a function to a pre-position action. This feature works
for Bosch protocols and for non-Bosch protocols.
Action
Select the appropriate action: Show or Set.
Pre-position
Enter the number of the pre-position to map.
Function
Select the appropriate function from the drop-down list.
Start auto pan
Start auto pan with limit
Stop auto pan
Start custom tour
Stop custom tour
Start tour
Stop tour
Start tour A
Stop tour A
Start tour B
Stop tour B
Compass on
Compass off
Azimuth on
Bosch Security Systems
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera lens
zooms again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
User Manual
Camera | en 37
2022-01 | 1.13 |