Date/Time - Bosch MIC inteox 7100i User Manual

MIC inteox 7100i
The device has three authorization levels: service, user, and live.
–
–
–
A fourth user group, VCA configuration, has the privilege to configure VCA only.
Note: Configuration and use of this user group is available only in Configuration Manager (7.20
or later).
To edit a password
To edit a password, click the pencil icon to the right of the column Type for the appropriate
User name.
To create a new user
To create a new user, click Add.
In the box User, fill in the fields. For Group, select the appropriate authorization level. For
Type, select either Password (for a new password) or Certificate (for a certificate that the
new user is authorized to use).
Note: Use a maximum of 19 characters. Do no use special characters.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
Notice!
i
A new password is only saved when you click the Set button. You should therefore click the
Set button immediately after entering and confirming a password.
3.3

Date/Time

Date format
Select the required date format from the dropdown menu.
Device date/Device time
Notice!
i
Make sure that recording is stopped before synching to the PC.
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time.
1.
2.
Note: It is important that the date/time is correct for recording. An incorrect date/time setting
could prevent correct recording.
Device time zone
Select the time zone in which the system is located.
Bosch Security Systems
service is the highest authorization level. Entering the correct password gives access to
all the functions and allows all configuration settings to be changed.
user is the middle authorization level. At this level you can operate the device, play back
recordings, and also control camera, for example, but you cannot change the
configuration.
live is the lowest authorization level. At this level you can only view the live video image
and switch between the different live image displays.
Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week - it is added automatically.
Enter the current time or click the Sync to PC button to copy your computer's system
time to the camera.
User Manual
General | en 11
2022-01 | 1.13 |