Download Print this page

Care And Maintenance; Technical Data - Hay SLANT Instruction Manual

Design by branch
Hide thumbs Also See for SLANT:

Advertisement

TECHNICAL DATA

This product is fitted with an E27 bulb
fitting. HAY recommends using this product
with LED bulbs, max. 15W. HAY will not
accept any responsibility for any accidents,
injuries or damages that occur due to the
use of incorrect bulbs.
ATTENTION
Ensure that the power supply to the
circuit has clearly been turned OFF
before installing the product. In some
countries, electrical installation must be
carried out by authorised electricians/
contractors; please check with your local
authority for guidance. The product must
not be modified in any way. HAY accepts
no responsibility for any products that
have been modified or tampered with.
If the external flexible cable or cord
of this luminaire is damaged, it should
be exclusively replaced by a qualified
electrician in order to avoid an electrical
hazard. This lamp is designed for indoor
use only.
The Slant table lamp is designed to be
used with LED based light sources only.
Halogen or incandescent light sources
should never be used, as it may cause
damage to the lamp.
– CARE AND MAINTENANCE –

CARE AND MAINTENANCE

The product can be cleaned with a soft
damp cloth and mild detergent, or a dry
microfibre cloth. Do not use alcohol or any
other solvents to clean the product and
avoid using abrasive or rough sponges.
Ensure that the power supply has been
turned OFF before cleaning the product.

Advertisement

loading

This manual is also suitable for:

268473