Advertisement
Quick Links
Advertisement
Related Manuals for Hay PC PORTABLE
Summary of Contents for Hay PC PORTABLE
- Page 1 I NST RUC T ION M A N UA L P C P OR TA B L E B y P i e r r e C h a r p i n...
- Page 3 The PC Portable Lamps are available in a variety of colours and are ideal for table lighting in domestic environments, as well as at cafés, restaurants and other...
-
Page 4: Technical Data
This product is fitted with a DC 3.7V). Replacement bulbs must be the same type as rechargable, high-performance lithium-ion battery, 3.7V, the one supplied with the product. HAY will not accept any 2600mAh. responsibility for any accidents or injury that occurs due AT T EN T ION The product must not be modified in any way. - Page 5 Unpack all the components and check that you have received all the components listed. Remove the shade by turning it counterclockwise and then lifting it off the lamp base.
- Page 6 Locate the supplied bulb, remove it from its packaging and place it into the bulb fitting, located in the lamp base. For replacement bulb options, please refer to the HAY website.
- Page 7 Place the shade onto the lamp base, aligning the grooves on the shade with the bayonet fitting inside the lamp base. Turn clockwise and tighten securely.
- Page 8 To charge the battery, insert the USB charger into the USB port on the bottom of the lamp and connect the cable to a power supply. When the battery is charging, the light on the bottom will show red. When the battery is fully charged, the light will show green.
- Page 9 To turn the lamp on, touch the round button on the bottom of the lamp. The lamp has a three- step dimmable feature. First push sets it to maximum brightness, second push to medium brightness and the third push to lowest brightness. Fourth push turns the lamp off. 100%...
- Page 12 Havnen 1 8700 Horsens Denmark +45 4282 0282 / hay@hay.com 11022020...
Need help?
Do you have a question about the PC PORTABLE and is the answer not in the manual?
Questions and answers
Are there Amy troubleshooting tips when the touch función no longer turna off or selects from the different luminosities?
The manual does not provide specific troubleshooting tips for issues with the touch function. However, you can try the following general steps:
1. Ensure the lamp is fully charged (check if the charging indicator turns green).
2. Disconnect and reconnect the charger to reset the lamp.
3. Clean the touch button to remove any dirt or moisture that may interfere with sensitivity.
4. If the problem persists, refer to the manual or contact HAY support.
This answer is automatically generated