Download Print this page

Hay NOC CLAMP Instruction Manual

Download this manual

– INSTRUCTION MANUAL –

NOC CLAMP

DESIGN BY SMITHMATTHIAS

Need help?

Do you have a question about the NOC CLAMP and is the answer not in the manual?

Page 1 – INSTRUCTION MANUAL – NOC CLAMP DESIGN BY SMITHMATTHIAS...
Page 3: General Information
– GENERAL INFORMATION – TECHNICAL DATA CARE AND MAINTENANCE This product is fitted with an E14 bulb fitting. HAY The product can be cleaned with a soft damp recommends using this product with a LED bulb. cloth and mild detergent, or a dry microfibre cloth.
Page 4 – PARTS – Lamp...
Page 5 Unpack all the parts and check that you have received all the parts listed. Screw an E14 bulb into the bulb fitting.
Page 6 Clamp the clip light in place by adjusting the circular grip. The shade can twist 360 degrees.
Page 7 Loosen the head adjustment grip to adjust the angle of the head. Retighten the head adjustment grip to secure the desired angle of the head in place.
Page 8 – UK CUSTOMERS ONLY – For UK customers, a plug converter will be supplied. If not included, please contact the HAY retailer from where the lamp was purchased. Insert the EU plug into the converter provided. Close the converter over the EU plug with the pins secured in the internal spring clip contacts.
Page 9: Care And Maintenance
Please find our Care & Maintenance guide by scanning the QR code You can find more relevant information on Noc Clamp by scanning the QR code You can also find the same information here hay.dk/downloads...
Page 12 Havnen 1 8700 Horsens Denmark +45 4282 0282 / hay@hay.com www.hay.com 16/12/2021...