This product is fitted with an E14 bulb fitting The product can be cleaned with a soft damp and supplied with a suitable LED bulb. HAY cloth and mild detergent, or a dry microfibre recommends using the supplied bulb with this cloth.
Page 5
Unpack all the parts and check that you have received all the parts listed. Make sure the light is unplugged from the mains power. To install the bulb, place one hand on the bulb holder and gently twist the bulb clockwise as shown below.
Page 6
– UK CUSTOMERS ONLY – For UK customers, a plug converter will be supplied. If not included, please contact the HAY retailer from where the lamp was purchased. Insert the EU plug into the converter provided. Close the converter over the EU plug with the pins secured in the internal spring clip contacts.
CARE & MAINTENANCE Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your lighting. Please find our Care & Maintenance guide by scanning the QR code You can find more relevant information...
Need help?
Do you have a question about the CLOCHE and is the answer not in the manual?
Questions and answers