Introduction; Contents Of The Kit - RFXCOM RFXtrxLAN Manual

1. Introduction

The RFXtrxLAN can have the RFXtrx433XL or RFXtrx868XL transceiver installed.
The RFXtrxLAN is not designed for the RFXtrx433E but can used if you have soldering experience.
The transceiver is accessed using TCP/IP.
The default settings are:
- TCP port 10001 and DHCP
- Username/Password: admin / admin
Important:
The USB connection of the RFXtrx must not be used!!
It can't be used because the data connection is not present and the USB power is connected to the 5V
power adapter.

2. Contents of the kit.

Copyright, RFXCOM 2021
RFXtrxLAN Rev. 2.0 page 3 / 14