Chipset - Emerson RXi2 - LP Hardware Reference Manual

RXi2-LP IPC Hardware Reference Manual
GFK-3068B
3.3

Chipset

This section configures relevant chipset functions.
Figure 17: Chipset
BIOS Parameter
OnChip SATA Channel
OnChip SATA Type
SD Mode
SD Host Controller Version
HD Audio
Restore on AC Power Loss
GPP2 Hotplug Mode Control
GPP3 Hotplug Mode Control
DP0 Output Mode
Dp1 Output Mode
Auto Backlight Dimming
Minimum Dimming Level
BIOS Setup
Description
Enable or disable Serial ATA
Select OnChip SATA Type: Native IDE, AHCI, or Legacy IDE.
Enable or disable Secure Digital (SD) Mode configuration.
Select Secure Digital (SD) host controller version: SD2.0 or SD3.0.
HD Audio will be enabled if present, disabled otherwise.
Power On – When Power returns after an AC power failure, the
system will automatically power-on.
Power Off - When power returns after an AC power failure, the
system will remain off. You must press the Power button to power
on the system.
Last State - When power returns after an AC power failure, the
system will return to the state where you left off before power
failure occurs. If the system's power is off when AC power failure
occurs, it will remain off when power returns. If the system's
power is on when AC power failure occurs, the system will power-
on when power returns.
Enable or Disable GPP2 Hotplug Mode Control
Enable or disable GPP3 hotplug mode control.
Select NB PCIe to connect type (display device): EDP or Disabled.
Select NB PCIe connect type (display device): DP or Disabled
Enable or disable dimming backlight by TB573D.
Set the minimum dimming level control. The range is 1~20%.
Section 3
Aug 2021
25