Bios Setup; Submenu - Emerson RXi2 - LP Hardware Reference Manual

RXi2-LP IPC Hardware Reference Manual
GFK-3068B
Section 3:
3.1

BIOS Setup

The BIOS is a program that handles of the basic levels of communication between the CPU and
peripherals. It contains codes for various advanced features found in this system board. The BIOS allows
you to configure the system and save the configuration in a battery-backed CMOS so that the data is
retained even when the power is off. In general, the information stored in the CMOS RAM of the EEPROM
will stay unchanged unless a configuration change has been made, such as a replacement of a hard drive,
or addition of a device.
It is possible for the CMOS battery to fail over time, causing CMOS data loss. If this happens, you need to
install a new CMOS battery and reconfigure the BIOS settings.
Keys
Right and Left arrows
Up and Down arrows
<Enter>
+ (plus key)
- (minus key)
<F1>
<F2>
<F3>
<F4>
<Esc>
3.1.1

Submenu

When " " appears on the left of a particular field, it indicates that a submenu which contains additional
options is available for that field. To display the submenu, move the highlight to that field and press
<Enter>.
BIOS Setup
BIOS Setup
Function
Moves the highlight left or right to select a menu.
Moves the highlight up or down between submenu or fields.
Press <Enter> to enter the highlighted submenu or item.
Scrolls forward through the values or options of the highlighted field.
Scrolls backward through the values or options of the highlighted field.
Displays general help
Pervious values
Load Optimized Defaults
Saves and resets the setup program.
Exit to the BIOS Setup Utility.
Section 3
Aug 2021
12