Network Stack Configuration - Emerson RXi2 - LP Hardware Reference Manual

RXi2-LP IPC Hardware Reference Manual
GFK-3068B
3.2.14

Network Stack Configuration

This section is used to enable or disable network stack settings.
Figure 16:
BIOS Parameter
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
PXE Boot Wait Time
Media Detect Time
BIOS Setup
Network Stack Configuration
Description
Enable or disable the UEFI network stack. When Network
Stack is set to enabled, the screen will be displayed as below.
When enabled, Ipv4 PXE boot supports. When disabled, the
Ipv4 PXE boot option will not be available.
When enabled, Ipv6 PXE boot supports. When disabled, the
Ipv6 PXE boot option will not be available.
Enter the wait time value to abort the PXE boot.
Enter the wait time in seconds to detect media.
Section 3
Aug 2021
24