RXi2-LP IPC Hardware Reference Manual
GFK-3068B
3.2.13
NCT 6112D Super IO Features
This section is used to configure some control functions of the system super IO chip.
Figure 15
BIOS Parameter
WatchDog Count Mode
WatchDog TimeoutValue
BIOS Setup
NCT 6112D Super IO Features
Description
A WatchDog timer (WDT) is a hardware timer that automatically
generates a system reset if the main program neglects to periodically
service it. It is often used to automatically reset an embedded device
that hangs because of a software or hardware fault. Use this menu to
select the WatchDog Timer Unit: second or minute.
Enter the value to set the Super IO WatchDog timer. 0 means disabled.
Section 3
Aug 2021
23