Page 1
MS29998 ASSEMBLY INSTRUCTIONS ASSEMBLY DOUBLE GATE KIT INSTRUCTIONS WITH DROP ROD MS29998 60 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM VER. 080421...
Page 2
MS29998 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. We recommend an area approximately 5’x 8’ for unobstructed assembling.
Page 3
MS29998 ASSEMBLY INSTRUCTIONS DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS 4 in 4” 11” 2” Surface 2” WWW.WAMBAMFENCE.COM...
Page 4
MS29998 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 1: Gate Jig Part 1 (1) Gate Jig Part 2 (1) 4” x 4” x 57” 4” x 4” x 54” 11/2” Stainless Steel Screws (8) 1. Drop Rod (1) 2. Drop Rod Bracket (2) 1 1/4”...
Page 5
MS29998 ASSEMBLY INSTRUCTIONS INSTALL DROP ROD STEP 2: STEP 2.1 STEP 2.2 Center and Insert the Drop level (1) Drop Rod into the top Bracket bracket and insert 4” shown. The top of the rod into the the bracket should bottom bracket as be 13”...
Page 6
MS29998 ASSEMBLY INSTRUCTIONS OPERATIONS STEP 3: STEP 3.1 To lock the gate rod in the up position, raise the gate rod while aligning the stop on the rod through the notch in the bracket. Rest the stop on the top of the bracket and turn 90 degrees to lock as shown.
Page 7
MS29998 ASSEMBLY INSTRUCTIONS Down Position Up Position Surface Surface WWW.WAMBAMFENCE.COM...
Page 8
MS29998 ASSEMBLY INSTRUCTIONS INSTALL DOUBLE GATE JIG STEP 4: STEP 4.1 Insert the Gate Jig part 1 into the Gate Jig part 1 (B). Drive (8) total 11/2” Stainless Steel Self-Drilling Screws into the gate jig part 2 as shown below to secure the jig.
Need help?
Do you have a question about the MS29998 and is the answer not in the manual?
Questions and answers