Shock Load During Transport Und Storage; Assembly; Flange Assembly - Bosch Rexroth MS2E Manual

44 / 70

Flange assembly

WARNING
Risk of injury and material damage due to
improper handling during transport!
−
Only use hoisting gear suited for the weight
of the motors. Use lifting sling belts or lifting
eye bolts. Secure the lifting eye bolts before
use.
Never walk under hanging loads.
−
Do not lift the motor at the shaft or on the
optional fan housing.
−
Use suitable protective equipment and pro-
tective clothing during transport, and wear
safety shoes.
Fig. 12: Lifting and transporting motors
•
Before transporting the motor, determine the
weight of the motor. For more details about
motor weight, please refer to the type plate
or the project planning manual (Technical
data).
•
Adjust the carrying capacity of the lifting
device to the motor weight.
•
If provided by the manufacturer, all lifting eye
bolts must be used and tightened before use.
•
Avoid increased transport vibrations.
•
Remove any existing transport locks prior to
commissioning and keep them.
Bosch Rexroth AG
MS2E Synchronous Servomotors
7.3 Shock load during trans-
port und storage
Function-impairing effects are avoided as long as
the specified limits are complied with.
Table 22: Permissible shock load for MS2E
motors
Frame size Maximum allowed shock load
Axial
MS2E03, -04, 100 m/s²
-05
MS2E06 100 m/s²
MS2E07 100 m/s²
MS2E10 100 m/s²
8

Assembly

8.1 Flange assembly
NOTICE
Motor damage due to ingress of liquids!
Liquid which exists over a longer period on the
shaft sealing ring of the output shaft can ingress
into the motor and cause damage.
−
Ensure that liquid cannot be present at the
output shaft.
−
Do not mount any open gearboxes (gear-
boxes that are not hermetically sealed).
Use all motor mounting holes to mount the motor
safely to the machine. For details on mounting
holes, please refer to the dimension sheets.
•
If coupling is direct, ensure that the support
is plane and the orientation is precise.
•
Avoid pinching or jamming the centering
collar on the motor side.
(11 ms)
radial
1,000 m/s²
500 m/s²
300 m/s²
200 m/s²
R911387136, Edition 03