Adjusting The Heating Water Temperature; Adjusting The Heating Temperature With An External Probe Connected - Riello Residence Condens i User Instructions

Operation

Adjusting the heating water temperature

To adjust the temperature of the heat-
ing water, turn the knob with the
symbol : clockwise to increase the
temperat ure or anticlockwise to re-
duce it.
When turning the knob the display
starts flashing, displaying the tem-
perature variation.
Depending on the type of sys-
tem, the most suitable temper-
ature range can be pre-selected:
standard systems 40-80 °C
floor installations 20-45°C.

Adjusting the heating temperature with an external probe connected

If there is an external probe, the out-
let temperature value is automatically
chosen by the system, which quickly
adapts the ambient temperature to
any variations in the outdoor temper-
ature.
If you want to alter the temperature
value (increasing or reducing the value
automatically calculated by the elec-
tronic card), use the heating water
temperature selector: turn it clockwise
to increase the temperature, or anti-
clockwise to reduce it. The correction
possibility is between -5 and +5 levels
of comfort, shown on the digital dis-
play by rotating the knob.
28