Alarm Sounder And Alarm Sounder With Supplementary Optical Indication - Siemens FDUD293 Technical Manual

5.7.3
Building Technologies
Fire Safety
Alarm sounder and alarm sounder with supplementary
optical indication
Executing commands - general procedure
The internal alarm indicator is set so that it flashes in normal mode.
The adapter cable is not plugged into the service device.
1. Select the desired command on the service device, for example the '2.1 Check'
menu item.
2. Guide service device towards device and hold it as vertically as possible to the
device. See figure.
3. To transfer the command to the device, press the <5> button on the keypad.
4. Read command result off LEDs and display.
Executing commands on a sounder base
See also
Deviation list [
Executing commands - general procedure [
Executing commands - general procedure
41]
Operation 5
28]
31
009718_e_en_--
2014-04-11