Power Saving - FIFOTRACK Q2 User Manual

Hide thumbs Also See for Q2:

Table of Contents

Q2 USER GUIDE

12 Power Saving

Q2 will enter into different working modes automatically for power saving according to different

time interval settings. Based on the 6-axis motion sensor, the device can detect its move/stop state

accurately. The users only need to adjust GPRS uploading time intervals to achieve the excellent

tracking performance and power saving results.

Command to set GPRS tracking time interval

000000,B03,<move time interval>,<stop time interval>

1) 000000: SMS command password, default 000000.

2) <move time interval>: tracking time interval under moving, unit is second, default is 30

seconds

3) <stop time interval>: tracking time interval when the device stops, unit is second, default

30s.

4) No matter what time interval is set, incoming SOS number phone call or SMS command

message always can wake up device.

Configuration SMS command examples

I want to track at every 30 seconds always, no

matter this device moves or stops

I want to track at every 24 hours

I want to track at 30 seconds while the device

moves, track at every 3600 seconds while the

device stops

I want to track at every 300 seconds while the

device moves, disable the data uploading while

the device stops

I want to disable the time interval tracking, only

call the device to get location when I need.

Please e-mail us at info@fifotrack.com if any questions or feedback.

000000,B03,30,30

000000,B03,86400,86400

000000,B03,30,3600

000000,B03,300,0

000000,B03,0,0

Table of Contents