Summary of Contents for Tews Technologies TPMC866-TM-20
Page 1
Transition Module for TPMC866 with 8 RJ45 Connectors Version 1.0 User Manual Issue 1.3 July 2007 D76866871 TEWS TECHNOLOGIES GmbH TEWS TECHNOLOGIES LLC Am Bahnhof 7 Phone: +49-(0)4101-4058-0 9190 Double Diamond Parkway, Phone: +1 (775) 850 5830 25469 Halstenbek, Germany...
Page 2
However TEWS TECHNOLOGIES GmbH reserves the right to change the product described in this document at any time without notice. TEWS TECHNOLOGIES GmbH is not liable for any damage arising out of the application or use of the device described herein.
Page 3
Issue Description Date First Issue June 2002 Completion “Technical Specification” April 2003 New address TEWS LLC September 2006 Added details for Jumper Configuration July 2007 TPMC866-TM-20 User Manual Issue 1.3 Page 3 of 13...
1 Product Description The TPMC866-TM-20 is a complete interface solution for all versions of the TPMC866: The TPMC866-10 (8 serial channels RS232), the TPMC866-11 (8 serial channels RS422) and the TPMC866-12 (8 serial channels RS422/RS485). The TPMC866-TM-20 comes with a TA105-10 cable (0.8m ribbon cable with 50 pin ribbon cable connector and 50 pin SCSI-2 male connector).
Power only required to supply on board termination or to provide +5V to pin 1 of the RJ45 connectors of channel 3 to 8. Fuse protected by a 1A Multifuse. MTBF 377345h Figure 2-1 : Technical Specification TPMC866-TM-20 User Manual Issue 1.3 Page 7 of 13...
Remove all jumpers from the other jumper fields of the Jn1 to Jn4 group. Channel 1 and 2 of the TPMC866-TM-20 additionally support DCD and DTR for the TPMC866-10. Default configuration for TPMC866-TM-20: all jumpers installed on Jn1 => RS232 DTE.
Need help?
Do you have a question about the TPMC866-TM-20 and is the answer not in the manual?
Questions and answers