Setting Up The Digital Video Input Signal; Setting A Password; Password Settings - Canon X600 User Manual

Setting up the Digital Video Input Signal

[Digital video]
DIGITAL VIDEO
You can select the standard of the digital video
input signal.
System settings
Other settings
Digital video
Projects a full range digital signal.
F
Projects a limited range digital sig-
L
nal.
Press the [OK] button to confirm, and then press
the [MENU] button.
Refer to the User's Manual that came
with the AV equipment for more
detailed information on settings.
Setting Various Function with the System Settings Menu

Setting a Password

[Password settings]

DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
System settings
Other settings
Password settings
Disables the password protection.
Off
Enable the password protection.
On
Press the [OK] button to confirm, and then press
the [MENU] button.
Once you set a password, the pass-
word entry screen appears at power-
on. Enter a 4-digit password with [ ],
[ ], [<], and [>]. If the password is
valid, projection starts. If you enter a
wrong password three times, the pro-
jector will be turned off.
To cancel the password, remove the
power plug from the AC outlet after
the projection, and then insert the
power plug while holding down the
[MENU] button until the projector
beeps.
101