Adjusting the Total
Number of Dots
Adjust the total number of horizontal dots.
Display settings
Input signal settings
Total dots
Increase the total number of dots.
>
>
Reduce the total number of dots.
<
<
This adjustment is required when
the auto PC adjustment cannot
project images correctly.
Adjusting the
Tracking
Adjust the tracking when the projected
image flickers due to a tracking error.
Display settings
Input signal settings
Tracking
Increases the set value.
>
Decreases the set value.
<
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG
separately.
RGB-2]
signal
53