Standard Feeding - Canon DR-7080C Instruction Manual

N Standard Feeding
To use the standard feeding mode, instruct the scanner to start from the
application.
1
Select [Standard Feeding] in [Feeding Option] on the ISIS/TWAIN
driver's settings screen.
2
Place the document onto the scanner.
See "Placing Documents onto the Scanner," on page 48 for information about placing
documents onto the scanner.
Important
3
From the application you are using, execute the required command
to start scanning.
This starts scanning.
4
When scanning of the document is complete, the application goes
into the Ready Mode.
If paper feeding stops during scanning due to a system error or paper jam, make sure
that the last page of the document was recorded properly before continuing to scan.
Note
4.3 Document Feeding and Scanning
55