Setting The Scsi Id And Terminator - Canon DR-7080C Instruction Manual

Location for attaching ferrite core
Attach the ferrite core to the SCSI cable connecting the scanner to the next SCSI
device.
DR-7080C
SCSI Cable
PC
Clamp the ferrite core on the SCSI cable approximately 3 cm from the connector
of the next SCSI device to be connected, closing it until you hear a clicking sound.
SCSI Connector
Ferrite core
N Setting the SCSI ID and Terminator
Set the SCSI ID and the terminator on the DIP switches located between the
SCSI connectors and the USB connector.
Move the DIP switch up to turn it OFF and move it down to turn it ON.
SCSI ID
Set the SCSI ID referring to the table above.
Set unique SCSI IDs to any other built-in SCSI devices or SCSI devices
connected to the computer.
Ferrite core
SCSI Device
Terminator
2.2 Connecting to a Computer
SCSI Device
approx. 3 cm
approx. 3 cm
SCSI ID SW1
0 OFF
1 ON
2 OFF
3 ON
4 OFF
5 ON
6 OFF
7 ON
SW2 SW3
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
OFF ON
ON ON
ON ON
27