Positioning A Document On The Flatbed (Platen Glass) - Canon DR-7080C Instruction Manual

Positioning a Document on the Flatbed (Platen Glass)

Use the following procedure to scan on the flatbed (platen glass) when scanning a
book, thick document, very thin document, an OHP (Overhead Transparency)
transparency, or any other document that cannot be scanned using the feeder.
1
Raise the feeder.
G Lower the feeder slowly, taking care to avoid pinching your fingers. Failure to do so
might result in personal injury.
Important
G When scanning on the flatbed (platen glass), raise the feeder at least 300 mm until
the opening sensor unit is disengaged.
4.2 Placing Documents onto the Scanner
Opening Sensor
51