Turning On Or Off The Power; Turning On The Power - Canon DR-7080C Instruction Manual

Turning ON or OFF the Power

Follow the procedures below to turn ON or OFF the scanner power.

Turning ON the Power

Be sure to turn ON the power of all connected SCSI devices before you turn ON the
computer.
Important
1
Turn ON the scanner.
The illustration below shows the location of the power switch.
OFF
ON
Turning ON the scanner causes the display panel to appear as shown below.
If you hear a strange sound, detect smoke or abnormal heat, sense vibration, or smell
odd odors around the scanner, turn OFF the power immediately and disconnect the
WARNING
power cord from the power outlet. Contact your service representative immediately.
Failure to do so might cause a fire.
2
Turn ON the computer.
You will need to install the scanner device driver when you start Windows the first time
after you connect the scanner to your computer. (See "Recognizing the Scanner," on
Note
p. 32.)

2.3 Turning ON or OFF the Power

31