How To Place Documents; Switching The Feed And Eject Methods; Placing Documents For Standard Feeding - Canon imageformula DR-C125 Reference Manual

0-00-DR-C125_RG_UK.book Page 27 Thursday, September 8, 2011 6:03 PM

How to Place Documents

Switching the Feed and Eject
Methods
Use the two levers on the scanner to switch the feed and eject
methods based on the type of document you are scanning.
The feed and eject methods and lever positions for each document
type are as follows.
Feed method (lever
Document type
position)
Standard paper
Standard feeding
and business
(lower)
cards
Plastic cards, thick
paper, thin paper, Non separation
and bound or feeding (upper)
fastened paper
Feed Selection Lever
Standard Feeding Non Separation
Feeding
Eject Selection Lever
U-turn Path Straight Path
Eject method (lever
position)
U-turn path (upper) or
straight path (lower)
Straight path (lower)
Placing Documents for Standard
Feeding
Ordinarily, standard feeding should be used when scanning multiple
documents of a standard size at one time. Standard feeding enables
the multiple documents to be fed while separating each page.
1
Open the document feed tray.
2
Pull out the feed support.
27