Canon DR-7080C Instruction Manual page 64

Chapter 4 Using the Scanner
3
Load the document into the document feeder tray.
The scanner detects the documents, and scanning starts.
See "Placing Documents onto the Scanner," on page 48 for information about placing
documents onto the scanner.
Important
4
When scanning of the document is complete, the scanner goes into
the Ready Mode.
5
Raise the document feeder tray to remove the ejected document
pages.
Be sure to remove ejected document pages from the document eject tray before
scanning another document. Leaving a document in the document eject tray and
Important
scanning another document can cause a paper jam.
6
Loading another document into the document feeder tray causes
scanning to start automatically. After you finish scanning, press
the [Stop] key.
58