Removing The Transportation Screw; Ferrite Core - Canon DR-7080C Instruction Manual

Removing the Transportation Screw

A transportation screw is installed at the factory to lock the scanner's optical unit
in place and protect it against damage caused by vibration and other forces during
shipment. You must remove the transportation screw before trying to use the
scanner.
If the transportation screw is not removed, then when the scanner is turned ON
"Please wait" appears on the display panel and remains there unchanged. Turn OFF
Important
the scanner and remove the transportation screw.

Ferrite Core

When connecting to another SCSI device sequentially for use after connecting a
SCSI cable to the scanner, attach the supplied ferrite core to the SCSI cable. (See
"Attaching the Ferrite Core," on p. 26.)
When connecting to another SCSI device sequentially after connecting a SCSI cable to
the scanner, be sure to attach the ferrite core to the SCSI cable. If you use the scanner
CAUTION
without attaching the ferrite core, radio wave interference may occur.
1.2 Before Getting Started
15