Whirlpool SIA90IN Manual page 9

MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE (1)
Press the button, the unit enters 6th sense
mode directly regardless of the appliance is on or off.
Under this mode, operation mode, temperature
and fan speed are automatically set based on the
actual room temperature.
Indoor Operation
temperature mode
Over 27°C
COOLING
COOLING OR
20°C - 27°C
FAN ONLY
Below 20°C
FAN ONLY
Note:
Temperature, fan speed and louver direction can be
adjusted. You can adjust to your desired settings if
you still feel uncomfortable.
COOL mode (2)
Press the COOL button to start the cooling operation.
You can set the desired temperature, fan speed and
louver direction by pressing interrelated buttons (See
previous page).
DRY mode (3)
Press the DRY button to start the dehumidification
operation to reduce the humidity of room.
SLEEP mode (4)
SLEEP mode can be set in 6th Sense , Cool
or DRY operation mode.
This function gives you a more comfortable
environment for sleep.
In SLEEP mode,
• Fan speed is automatically set at silent or low speed.
• Set temperature will be rised by 1°C per hour
till up to 28°C.
TURBO mode (5)
Press the TURBO button to start or stop fast cooling.
Appliance is operating under super high fan speed and
indicator is flickering all the time.
You can change the fan speed by pressing FAN SPEED
button.
FAN ONLY mode (6)
Press the FAN ONLY button to start or stop fan
operation. Fan speed and louver direction can be adjusted
Note: This function can only be activated under the
appliance at off status.
Target
temperature
26°C
24°C
22°C
8
1
2
3
6
4
5