Whirlpool SIA90IN Manual page 8

ORDINARY USING GUIDE
1. Turning on
Press button to activate the appliance.
During mode changes wait a few seconds and repeat
the operation if the unit does not respond at once.
2. Selecting mode
Press the button to select the operation mode you
want, such as 6the Sense, COOL, DRY, SLEEP,
TURBO.
3. Setting fan speed
Each time the FAN SPEED button is pressed,
the fan speed changes in sequence:
Auto → Silent → Low → Mid
↑
4. Setting temperature
Press once to raise temperature setting
by 1 °C
Press once to lower temperature setting
by 1 °C
Press the ACCURATE button to set the temperature
at decimal digits.
Range of available set temperature: 16°C~31.9°C
5. Airflow direction control
Horizontal airflow is automatically adjusted to a
certain angle in accordance with the operation
mode after turning on the unit.
The direction of airflow can be also adjusted to
your own requirement by pressing the SWING
button on remote control.
Pressing SWING button once, the horizontal
adjustment louver will swing up and down
automatically.
Pressing the "SWING" button again when the
louvers swing to a suitable angle as desired.
Vertical airflow control (with hands)
Turn the control rods of the vitical adjustment
louvers to change vertical air flow as shown.
→ High
7
Note:
A -Do not turn the horizontal adjustment louvers
manually, otherwise malfunction may occur. If
that happens, turn off the unit first and cut off
the power supply, then restore power supply
again.
B -It is better not to let the horizontal adjustment
louver tilt downward for a long time at
COOLING or DRY mode to prevent
condensed water from dripping.
control rod of vertical
adjustment louvers