Table of Contents
Advertisement
Specifying the Finishing Options
This section describes how to select a finishing option and how to use Booklet Printing.
Selecting a Finishing Option
The various options in the [Finishing] sheet enable you to select the most appropriate tray or bin
output method for each document.
3
Selecting the Output Option
The available output options are:
Off
Collate
Group
Staple & Collate
Staple & Group
NOTE
• The available finishing options vary, depending on the printer model you use or output options attached
to the printer.
• When a collate option is available in the [Print] dialog box of the application software, the Collate option
setting of the printer driver has priority, regardless of the same setting in the application software.
However, in some application software, output is collated when the collate option is selected in the
application software even if the Collate option is not selected in the printer driver.
• To output document pages using the Group option, you must select [Group] in the printer driver,
regardless of a group option setting in the [Print] dialog box of the application software.
3-18
Specifying the Finishing Options
Outputs the printed document without any finishing.
Outputs sorted copies of the document in correct binding order into the output
tray.
Outputs document pages in groups into the output tray.
Outputs sorted and stapled copies of the document into the output tray.
Outputs document pages in stapled batches into the output tray.
Advertisement
Table of Contents
