Canon UFR II Driver Driver Manual page 88

3
3
4
5
3-20
Specifying the Finishing Options
Click the [Finishing] tab.
Select a finishing option, such as [Collate], [Group], [Staple & Collate],
or [Staple & Group], under [Finishing].
If you selected [Staple & Collate] or [Staple & Group], click [Staple
Position] ➞ specify the position to staple in the [Staple Position] dialog
box ➞ click [OK].
If you did not select [Staple & Collate] or [Staple & Group], proceed to step 6.
NOTE
Depending on the printer you are using, the staple position cannot be specified.