Plug And Play Installation (Windows Xp/Server 2003) - Canon UFR II Driver Driver Manual

Plug and Play Installation (Windows XP/Server 2003)

NOTE
In the following procedure, an operation screen for Windows XP is used; the screen might differ
depending on your operating system.
1
2
2
3
4
2-28
Installing the Software
Connect the cable from the printer's USB port to the PC's USB port,
and then turn the printer ON.
Start Windows, and then insert the Printer Driver Software CD-ROM
into the CD-ROM drive.
The Found New Hardware Wizard starts.
Confirm that [Install the software automatically (Recommended)] is
selected ➞ click [Next].
Windows searches for the driver automatically, and then starts the installation.
Click [Finish] after the files are copied.
The USB driver and the printer driver are now installed.