Creating Tabs - Canon UFR II Driver Driver Manual

9
10
11
3

Creating Tabs

NOTE
• This option is available for the iR C5870, iR 5870C, iR C6870, iR 6870C, iR105+, iR6570/5570, iR8070,
iR85+, and iR9070.
• If [Group] or [Rotate] is selected for [Finishing] in the [Finishing] sheet, this option is not available.
• Before creating tab paper, open the printer properties dialog box from the [Printers] folder
to Tray Assignment] on the [Device Settings] sheet
to Tray Assignment] dialog box.
1
3-40
Using Cover or Sheet Insertion Options
Specify the width to shift the image to be printed on the tab part of the
paper in [Shifting Width].
NOTE
You can change the unit used to specify the shift width (millimeters or inches).
Click [OK].
The [Inserting Sheet Settings] dialog box closes.
Click [OK].
From the printer properties dialog box, click the [Paper Source] tab.
➞
select [Tab Paper] from [Paper Type] in the [Form
➞
click [Form