Canon L250 User Manual page 229

Message Error Code
MEMORY FULL –
PLEASE WAIT
MEMORY USED nn% –
NO ANSWER #005
NO RX PAPER #012
NO TEL # #022
NOT AVAILABLE –
PLEASE WAIT –
REC'D IN MEMORY –
Error Codes, Messages, and Solutions
Cause
The FAX-L250 is sending a
fax and its memory is full.
Shows how much of the
FAX-L250's memory is in
use.
The receiving fax machine
does not answer.
The other party's fax
machine is out of paper and
its memory is full.
The one-touch or coded
speed dialling number has
not been registered.
In manual sending via the
handset, you tried to use a
one-touchspeed dialling
button or a coded speed
dialling code that has a
group registered in it.
The FAX-L250 is warming
up.
The paper or toner ran out,
or a paper jam occurred, so
the FAX-L250 received the
document in memory.
Action
Wait until the fax is sent. The
FAX-L250 continues to send
the fax as memory becomes
available.
If you need more memory, print
or send any documents stored
in memory.
Make sure you dialled the
correct number. Try again later.
Contact the other party and
have them add paper to their
fax machine.
Register the number.
In manual sending via the
handset, you cannot send a
document to multiple
destinations. Send the document
to one destination at a time.
Wait until the time and
receiving mode appear in the
LCD display, then begin.
Add paper to the sheet feeder,
change the toner cartridge, or
clear the paper jam, as needed.
When the problem is solved, the
FAX-L250 automatically prints
the document stored in memory.
10-33