Printing Problems - Canon L250 User Manual

Printing Problems

If you are having problems printing with the FAX-L250, check the problems and solutions listed in the
following table.
Problem
The ALARM lamp comes on
and the FAX-L250 beeps while
printing?
Nothing prints?
Printout does not match paper
size?
The printout curls?
Possible cause
The FAX-L250 may have a
paper jam.
The power cord may not be
plugged in securely.
The toner cartridge may need
to be replaced.
Paper may not be loaded and
aligned correctly in the sheet
feeder.
Your pages may include a large
amount of toner.
Problems Index
Solution
Clear any paper jams as
described earlier in this.
chapter.
If the FAX-L250 has no paper
jam, unplug it, wait five seconds,
then plug it in again. If the
problem is fixed, the ALARM
lamp will be off, and the LCD
display will show the time and
receiving mode (standby mode).
If the ALARM lamp stays on, call
your local authorised Canon
dealer or service centre.
Make sure the power cord is
plugged securely into the unit and
into a wall outlet.
Replace the toner cartridge. See
page 2-27.
Make sure the paper is loaded
correctly. See page 2-33.
Remove the printout as soon as it
exits the FAX-L250 and let it dry,
then roll it in the direction
opposite of the curl.
10-27