Reading Mode - Baracoda D-Fly Programming Manual

All manuals and user guides at all-guides.com

1.3. Reading Mode

In trigger mode, pressing the trigger will activate the beam.
The Aiming trigger mode has been developed for users who need to scan barcodes very close one to another
and they have to be sure to always read the correct one. Once in this mode, in order to read a barcode user will
have to press the trigger twice. Pressing it the first time will switch on the beam but will not switch on the
decoder (thus allowing user to aim at the correct barcode) while pressing the trigger the second time will
activate the decoder thus allowing the D-Fly to actually decode the barcode.
D-Fly – Programming Guide v1.2
Trigger (*)
Aiming Trigger Mode
Data Capture
for Workforce
in Motion
- 9 -