Operation - HomeMatic Evo Mounting Instruction And Operating Manual

6

Operation

After teaching-in and mounting have been performed,
simple operations are available directly on the device.
Further information on operation via the Homematic IP
app can be found in the Homematic IP user guide at
www.homematic-ip.com.
If the radiator thermostat is in stand-by mode,
press the system button (D) once to activate the
display before using the device.
• Temperature: Turn the temperature control dial
(E) slightly to the right or to the left to change
the temperature of the radiator. In automatic
mode, the manually set temperature will remain
the same until the next point at which the profile
changes. Afterwards, the defined heating profile
will be activated again via the app. During manual
operation, the temperature remains activated un-
til the next manual change.
• Boost function: Press the system button (D)
briefly to activate the boost function for heating
up the radiator quickly and briefly by opening the
valve. There will be a pleasant room temperature
right away because of the radiated heat.
• Adjusting the display direction: Press the system
button (D) and at the same time turn the tem-
perature control dial (E) in the direction you want
Operation
55