Adaption Run - HomeMatic Evo Mounting Instruction And Operating Manual

Start-up
5.3

Adaption run

Once the batteries have been inserted, the motor
reserves. Meanwhile, "
( ) are displayed.
If the adapter run has been initiated prior to
mounting or if an error message (F1, F2, F3) is dis-
played, press the system button (D) the motor
reverses to the "
can then be restarted.
After the radiator thermostat has been mounted success-
fully, an adaption run (
to adapt the device to the valve. To do this, proceed as
follows:
• As soon as "
button (D) to start the adaption run.
Now, the radiator thermostat performs the adapting run.
" " and the activity symbol ( ) are displayed. During
this time, no other operation is possible. After the adapt-
C
ing run has been successful, the display returns back to
normal. You can now start operating the radiator ther-
mostat.
54
MANU
BOOST
MANU
BOOST
C
MANU
BOOST
C
" is displayed, press the system
MANU
BOOST
C
" and the activity symbol
C
" position. The adaptation run
) has to be performed in order