Bunn ITB/ITCB Programming Manual page 13

3. Select SHOW. The screen will scroll through all the brew settings for that particular recipe. When finished,
the display will return to the recipe name just viewed.
4. To see the settings again, select SHOW. To change settings, select MODIFY. Then the screen will display
BREW OZ and a batch light will be blinking.
5. Using (-) or (+), set the amount of brew water to be dispensed for that batch size.
6. When finished, press the other batch size and repeat step #8.
7. When finished setting both batch sizes, select DONE. The display should read 2 BATCHES DONE?
8. If both batch sizes are not correct press and release NO to return to the BREW OZ setup screen and repeat
steps #8, 9 and 10.
VIEW/MODIFY ITEMS
ICB
Brew Ounces
% Bypass
Pulse Brew/Preinfusion Times
Drip Times
* ITB/ITCB WITH FACTORY SWEETENER
BY PRESSING "MODIFY", YOU CAN STEP
THROUGH & CHANGE ALL THE BREW
SETTINGS FOR THAT RECIPE, SIMPLY
FOLLOW THE ON SCREEN PROMPTS
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
ITB/ITCB
Dilution Ounces
Dilution Delay Time
* SWEET METER
BY PRESSING "SHOW", THE
DISPLAY WILL AUTOMATICALLY
SCROLL THROUGH ALL THE BREW
SETTINGS FOR THAT RECIPE
REVIEW RECIPES
NO
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
Page 13
YES
NO NAME COFFEE
MODIFY SHOW NEXT
REGULAR
MODIFY SHOW NEXT
SCROLLS THROUGH
ALL DEFAULT RECIPES
(RECIPE NAME)
MODIFY SHOW NEXT
THAT WAS THE
LAST RECIPE
41581.2 091609